Applicable Concrete Sheet Pile

Pressed Concrete Sheet Pile sections applied to the Concrete Sheet Pile Press-in Method with the Concrete Piler are illustrated below. They are manufactured by Geostr Corporation in Japan. For further information, please consult your nearest Giken office.

Updated: Mar. 2001

Pile Section	Pile Dimensions				Per Linear Meter of Wall		Pile Weight (Sample)
Channel Type	Width ( B )	Thickness			Cracking Moment	Moment of Inertia	Length of Pile	Mass per Pile
	Width ( B )	( t )	( t1 )	( t2 )	Cracking Moment	Moment of Inertia	Length of Pile	Mass per Pile
	mm	mm	mm	mm	kN•m (tf•m) / m	cm⁴/m	m	kg/Pile
KC150A	1,000	150	60	60	21 (2.14)	14,600	4.0 5.0 6.0	945 1,180 1,410
KC150B		150	60	60	28 (2.86)	14,600	4.0 5.0 6.0	945 1,180 1,410
KC175		175	60	60	35 (3.57)	22,700	5.0 6.0 7.0	1,275 1,525 1,780
KC200A		200	75	50	41 (4.18)	33,500	6.0 7.0 8.0	1,780 2,080 2,375
KC200B		200	75	50	53 (5.40)	33,500	6.0 7.0 8.0	1,780 2,080 2,375
KC230		230	75	50	63 (6.42)	49,700	7.0 8.0 9.0	2,230 2,550 2,865
KC255A		255	75	50	83 (8.46)	66,100	9.0 10.0 11.0	2,685 3,020 3,360
KC255B		255	75	50	100 (10.2)	66,100	9.0 10.0 11.0	3,020 3,360 3,695
KC275A		275	75	50	120 (12.2)	81,200	10.0 11.0 12.0	3,140 3,490 3,840
KC275B		275	75	50	140 (14.3)	81,200	11.0 12.0 13.0	3,490 3,840 4,190
KC300		300	100	50	160 (16.3)	110,000	11.0 12.0 13.0	4,540 4,955 5,370
KC350		350	100	50	190 (19.4)	166,000	12.0 13.0 14.0	5,335 5,780 6,225

Dimensions and properties are subject to alteration by pile manufacturers without prior notice.